DCU / DU Series Batteries
The DCU / DU Series batteries are available in 50 to 200 Ah sizes. Certain size DCU products are nuclear Class 1-E qualified reliably safeguarding the nuclear power plants. They come with solid hardened lead terminals and transparent container to allow visual internal inspection. The DCU batteries are fully capacity tested to ensure out-of-the-box performance.
The DJ Series, 110 Ah to 200 Ah flooded batteries are engineered to provide superior performance. These two or three multi-cell batteries with single polarity terminals have standard UL94-V0 cover and transparent container allow visual plate inspection. Angled lead plated copper terminals provide higher performance with less connector’s thus lower installation and maintenance costs. A full line of seismic zone racks with spill containment are available.
C&D Technologies’ DJU Series flooded batteries are engineered to provide superior performance and reliability over the life of the product. These multi cell deigned batteries use proprietary techniques and quality components and materials for reduced maintenance and extended battery life. Reliable tongue and groove jar-to-cover seal design provides increased adhesive coverage area – offering unprecedented seal integrity during service. Top suspended positive plate design allows free downward growth without pressure on jar, cover, or post seal – extending reliability and product life. Recessed vent area to collect water and acid spills, keeping them away from posts and cover – lowering maintenance and clean-up costs. Wrapped separator design extends cycle life – improving product reliability. Enhanced post seal design allows post growth without transmitting forces to cover. These 4 Vdc and 6 Vdc batteries are available in Ah ratings from 110 Ah to 200 Ah.
The JC Series batteries are available in 50 to 300 Ah sizes. They come with solid hardened lead terminals and have standard UL94-V0 cover and transparent container to allow visual internal inspection. A full line of seismic zone racks, including IEEE-693-2005 qualified racks with spill containment are available.
C&D Technologies’ KCR/KAR Series flooded batteries are engineered to provide superior performance and reliability over the life of the product. These single cell batteries are designed using proprietary techniques and quality components and materials for reduced maintenance and extended battery life. Electrical testing to 100% capacity on every cell prior to shipping assures performance of every battery upon delivery. Proprietary vacuum-assisted, bottom-pour, positive-grid casting assures void-free grid quality resulting in long service life. Water bath charging results in consistently formed plates for reliable performance out of the box (no cycling required in the field). Suspended positive plates permit free growth without pressure on jar and cover. Transparent container allows visual inspection of plates.
The KCR / KAR batteries are available in 200 Ah to 825 Ah rated designs.
The KCT/KT Series, 270 Ah to 720 Ah batteries a rugged flooded battery design offered in Lead Calcium (KCT) or Lead Antimony (KT). These mono cell batteries come with single polarity terminals, cross–bolt holes, and standard UL94-V0 covers with transparent SAN or Polycarbonate containers allow visual plate inspection. A full line of seismic zone racks with spill containment systems are available.
The 4LCY/LY Series, 285 Ah to 646 Ah batteries, is a field service proven lead-calcium flooded battery design. The 4LCY’s 4 cell design provides a reduced rack length for optimum space utilization (up to 20% shorter racks than single cell design) with less intercell connectors allowing reduced installation and maintenance costs. The 4LCY comes with standard UL94-V0 covers with transparent SAN or Polycarbonate containers allow visual plate inspection. 4LCY products are shipped at 100% of its rated capacity and every cell is tested to ensure the out-of-box quality and performance. A full line of seismic zone racks, including IEEE-693-2005 qualified racks with spill containment systems are available.
The LCT Series, 840 Ah to 2320 Ah batteries are industry preferred flooded battery with 3 different offerings. The LCT-HP models provide a high power 1680 Ah and 1805Ah with dual polarity terminals, standard UL94-V0 covers and transparent container allowing visual plate inspection. The LCT ll-1700 battery has standard UL-94 V0 covers and transparent container to allow visual plate inspection with single polarity copper terminals improving shorter run time rates. The LCT/LT Lead Calcium (LCT) & Lead Antimony (LT) 840 to 2320 Ah batteries have dual polarity terminals, standard UL94-V0 covers with transparent SAN or Polycarbonate containers allow visual plate inspection, Also available is a 2LCT840/2LT840 with single polarity terminals standard UL94-V0 covers with transparent SAN or Polycarbonate containers allowing visual plate inspection. A full line of seismic zone racks with spill containment systems are available.
LCT-HP batteries are designed to provide more power into less space! For an example, LCT-1805HP product fits over 1800 Ahrs into the same footprint as traditional List 508 (1680 Ahrs at 8 hr rate to 1.75vpc @77F) cells. The factor that truly distinguishes LCT-HP product is that it ships at 95% of rated capacity; unlike other Telecom batteries which ship at 90% of their rated capacity. LCT-HP truly provides more power into less space!
The MCT ll Series, a 3000 Ah or 4000 Ah flooded battery optimized for today’s larger power requirements. Standard flame-retardant covers, dual polarity terminals with optional transparent containers allow visual plate inspection along with a built in cradle adding durability, bulge restraint, enhanced seismic performance and a cell spacer. The optional transparent containers are available in SAN, high impact UL94-V0 Flame retardant PVC or Flame Retardant UL94 HB Polycarbonate. A full line of seismic zone racks with spill containment systems are available.
TEL Series Top and Front Access Batteries
The TEL Long Duration Series, 30 Ah to 160 Ah 10 year design VRLA battery have been tested, qualified and certified by Telcordia passing all facets of the rigorous Telcordia SR-4228 providing over 10 years of service life under accelerated life conditions. The TEL series have top and front access copper alloy inserted terminal design with standard flame retardant UL94 V0 cover and container. The six and twelve volt multi-cell state of the art designs facilitate easy handling and installation. The TEL series of VRLA batteries are not restricted for transportation when properly packaged and identified. A full line of seismic racks including 23” Relay Racks and spill containment systems are available.
The Liberty Series, 55 Ah to 600 Ah 10 year top terminal design VRLA battery with industry proven reliability and dependability with standard high impact UL94 V0 plastic cover and container. Patented and time tested post seal design with secondary epoxy increase post seal integrity for leak free operation and superior reliability. The inserted copper terminals provide excellent high rate discharges and shorten maintenance times by reducing timely retorque. A full line of seismic racks and spill containment systems are available.
The msEndur ll Series, 280 Ah to 2180 Ah, the true long life 20 year VRLA battery with advanced low float current design provides the highest power density in the smallest footprint in the industry. The msEndur ll inserted copper alloy terminals contain an Ohmic Ring ™ allowing for consistent ohmic reading with standard UL94-V0 Polypropylene cover and container. A full range of various module layouts including 19”& 23” Relay Racks are available. This truly “Green” lead acid battery series is 100% recyclable and due to the low float current design requirement requires 1/5 less KW to operate providing customers significantly lower utility and air conditioning bills over the service life of the battery. The modules have seismic ratings and spill containment systems are available.
Liberty DCS Series
The Liberty® DCS features the proven DCS technology for maximum cycle life in a space efficient, cost effective package. The DCS technology coupled with an advanced Nano-Carbon enhanced negative electrode provides time proven results and unmatched, industry leading cycle life, even in partial state of charge (PsoC) operation.
Allied Power Associates is please to offer C&D Technologies’ advanced LI TEL Li‐ion batteries provide safe and reliable, high energy density storage, with long life for a wide variety of backup power applications around the world. C&D has used its long standing industrial standby power experience with years of research and development to meet the demanding requirements of a today’s new telecommunications installations.
Telecommunications equipment powered from diesel generators in off‐grid or unreliable grid locations
Renewable energy storage systems used to reduce CO2 emissions
Distributed power applications with size and floor loading constraints
BTS: Base transceiver station
OSP: Wireline Outside Plants
CO: Central Office
FEATURES AND BENEFITS
The LI TEL48-170C is capable of cycling and float service. The battery is designed for paralleling of multiple battery packs for increased reserve time.
High cycle life and deep cycle: For infrastructure powered from high cycle life and deep cycle cost primary energy sources (e.g. diesel generators powered in off‐grid or unreliable grid locations and anywhere energy storage systems are used to reduce CO2 emissions).
Maximum performance float operation: For applications where the grid is reliable the LI TEL series battery float performance provides the ideal long life, modular standby power solution.
Lightweight, high energy density standby power: The LI TEL series batteries, due to their excellent properties, are the optimal energy storage solution where limited space and or weight are important factors. The LI TEL series are approximately four to ten times lighter and less than half the volume than traditional battery technologies.
Battery management: The LI TEL series battery includes an embedded battery management system designed specifically for standby power that provides State of Health and State of Life indication. The management system operation under normal conditions is transparent; it takes action to disconnect or shut‐down the battery pack to prevent potentially abusive conditions. The battery pack is designed to be used simply as a battery for easy installation and operation.
Environmentally friendly: Lead‐free, recyclable, very high efficiency/reduced energy consumption.
|Capacity Typical||173 Ah|
|Capacity Rated||170 Ah|
|Energy Trypical||8.2 kWh|
|Volumetric Energy Density||157 Wh / I|
|Gravimetric Energy Density||112 Wh / kg|
|Operating Voltage Window||42.0 V to 53.9 V|
|Charge Voltage||52.0 V to 53.9 V|
|Equalize Charge||Not required|
|Charge Current Maximum||80 A|
|Discharge Current Maximum||80 A|
|Charge Efficiency 35°C (95°F)||> 98 %|
|Cycle Life 20°C (68°F)||4,300 cycles @ 80% DoD|
|Operating Temperature||-30°C to 50°C
(-22°F to 122°F)
|Store Duration maximum
10°C to 25°C (50°F to 77°F)
|12 months automatic refresh charge indication|
|Width (without handles)
Width (with handles)
|538 mm (21.2”)
564 mm (22.2”)
|Height||172 mm (6.8”), 4RU|
|Depth||564 mm (22.2”)|
|Weight||72.6 kg (160 lbs)|
|Battery Terminals (+,-)||Two post, M8 threaded studs
Feel free to call or email us to discuss your individual requirements and request a no obligation quotation.